Leopro-Battery.com > Information - Warning & Cautions
Warning & Cautions


Warning

About Ni-Cd / Ni-MH

- Do not immerse the battery in water or seawater , and keep the battery in a cool dry environment during stands by period .
- Do not use or leave the battery near a heat source such as fire or heater .
- Do not reverse the positive(+) and negative(-) terminals .
- Do not connect the battery to an electrical outlet .
- Do not dispose the battery in fire or heat .
- Do not short-circuit the battery by directly connecting the positive(+) and negative(-) terminal with metal object such as wire .
- Do not transport or store the battery with metal object such as necklaces , hairpins etc.
- Do not strike or throw the battery against hard surface .
- Do not directly solder the battery and pierce the battery with a nail or other sharp object .

About Ni-Cd / Ni-MH

- Please comply with the following items, to avoid leakage, heating, rupture and danger.
- Never try to connect the positive and the negative terminals with metal or other conductors, it may cause short circuit of the battery.
- Do not put the battery or battery pack into an airtight container. it may cause explosion.
- Do not put the batteries in fire, heat or disassemble them. And use only within the specified working temperature range.
- Do not discompose the battery
- Do not transform the positive pole or block the loophole on it.
- Never reverse charge.
- Do not let the alkaline electrolyte enter your eyes, when enters by any chance, wash with cleaning water immediately and call a doctor at once.
- Do not let the alkaline electrolyte stain with your skin or clothes. If stains, wash with cleaning water right away.
- Do not solder the battery directly.
- Do not throw or bump the battery violently.
- Put the battery in a place that infants or kids can not get it, to avoid swallowing mistakely, when this occurs in case, call a doctor at one

 
Cautions

About Li-Po

- Do not use or leave the battery at very high temperature (for example , at strong direct sun-light or in a vehicle in extremely hot weather). Otherwise, it can overheat or fire, its
performance will be degenerated and its service life will be shortened .
- Do no use it in a location where static electricity is rich, Otherwise, the safety devices may be damaged .
- In case the electrolyte get into the eyes due to leakage of battery , do not rub the eyes!
Rinse the eye with clean running water , and seek medical attention immediately . Otherwise, it may injure eyes or cause a loss of sight .
- If the battery gives off and odor , generates heat , becomes discolor or deformed , or in any way appear abnormal during use , recharging or storage , immediately remove it from the device or battery charger and place it in a contained vessel such a metal box.
- In case the battery terminals are contaminated , clean the terminals with a dry cloth before use .Otherwise, power failure or charge failure may occur due to the door connection between the battery and the electronic circuitry of the instrument .

About Ni-Cd / Ni-MH

- Please conform to the following items, to aviod performances deterioration, leakage, heating and rupture.
- Please read the manuals of the battery and the equivalent equipment carefully before use.
- Do not use or charge the battery in parallel.
- Please use a prescribed charger or conform to the conditions we specified when charge the battery.
- If the battery has not been charged or full-charged in a fixed time, please stop charge.
- Do not mixed use batteries in different type, model, capacity, size, charge and discharge, or new and old batteries in a same assembly.
- Do not put or install the battery at a heat location such as near a stove or the heating part of a transformer, or in sunlight or somewhere like that. Please store in dry and cool place.
- Do not put moe than 20 batteries in a series. If necessary, please consult with us.
- Cut the circuit if the battery not in use and take it out from the equipment for prolonge idleness.
- Cells and battery packs shall be delivered in discharged condition and be correctly charged in accordance with the specifications before testing or using.


Copyright ® 2007 LeoPro Battery Technology Company Limited. All rights reserved.